Non Metallic Bearings
A specially compounded reinforced Teflon material is used for the piston and rod bearings, assuring low friction characteristics. The bearing assembly is easily removed for quick replacement.
Long life K cylinders are specifically designed for non lube operation
High energy absorption poppet type adjustable cushions are available as a standard option. The cushion adjusting screw is normally located in position No. 2
Hard Chrome plated steel ground and polished. Two wrench flats standard on all bore sizes. Small male national fine threads are standard. All other threads available as options.
Hard coated I.D. aluminum for corrosion resistance and low friction.
All dynamic seals are self adjusting Block Vee Buna-N U-cups
Machined high strength aluminum alloy.
250 PSI air or "non stick" hydraulic
Operating temperature range from a minimum of 10° F (-12° C) to a maximum of 200° F (93° deg C).