Motion Controls is deemed ESSENTIAL BUSINESS. Our facility is fully operating. Please contact us if we can help you.
K-Series Numbering
K Series Part Number Description
For example, a 10" stroke 4.0" bore cylinder with a 1 3/8" shaft, single end, standard rod end, rear flange mounting and Viton seals would be: K 1375 400 SE 1000 RA2 VS
| General Description | Specific Information | CODE | K | 0625 | 150 | SE | SL1 | RA2 | FC,RC | |
| SERIES | K SERIES CYLINDER | K | ||||||||
| ROD SIZE | 5/8" | 0625 | ||||||||
| 1" | 1000 | |||||||||
| 1 3/8" | 1375 | |||||||||
| 1 3/4" | 1750 | |||||||||
| BORE SIZE | 1.5" | 150 | ||||||||
| 2.0" | 200 | |||||||||
| 2.5" | 250 | |||||||||
| 3.25" | 325 | |||||||||
| 4.0" | 400 | |||||||||
| 5.0" | 500 | |||||||||
| 6.0" | 600 | |||||||||
| 8.0" | 800 | |||||||||
| END STYLE | SINGLE END | SE | ||||||||
| DOUBLE END | DE | |||||||||
| STROKE | SPECIFY STROKE LENGTH (IN DECIMALS) | SL | ||||||||
| ROD END STYLE | SINGLE END | |||||||||
| FULL MALE THREAD "A" END | RA1 | |||||||||
| REDUCED MALE THREAD "A" END (STANDARD) | RA2 | |||||||||
| FEMALE THREAD "A" END | RA3 | |||||||||
| DOUBLE END (SUPPLY BOTH FOR DE) | ||||||||||
| FULL MALE THREAD "D" END | RD1 | |||||||||
| REDUCED MALE THREAD "D" END (STANDARD) | RD2 | |||||||||
| FEMALE THREAD "D" END | RD3 | |||||||||
| FRONT (HEAD) CUSHION | FC | |||||||||
| REAR (CAP) CUSHION | RC | |||||||||
| ROD CLEVIS | MF | |||||||||
| CLEVIS PIN AND RETAINERS | MZ | |||||||||
| CLEVIS BRACKET AND PIN (FACTORY ASSEMBLED) | MG | |||||||||
| EYE BRACKET (NOT NFPA FOR MP1) | MH | |||||||||
| FRONT (HEAD) TRUNNION MT1 | MA | |||||||||
| FRONT TRUNNION (CUSHIONED) MT1 | MB | |||||||||
| REAR (CAP) TRUNNION MT2 | MC | |||||||||
| REAR (CUSHIONED) TRUNNION MT2 | MD | |||||||||
| FRONT FLANGE | MJ | |||||||||
| REAR FLANGE | MK | |||||||||
| E3 MOUNT 8" BORE (HEAD END) | ML | |||||||||
| E4 MOUNT 8" BORE (CAP END) | MM | |||||||||
| MAGNETIC PISTON | SP | |||||||||
| METALLIC ROD WIPER | MW | |||||||||
| SIDE ANGLE MOUNT S1 | MI | |||||||||
| SIDE LUG MOUNT S2 | MV | |||||||||
| VITON SEALS | VS | |||||||||
| STOP TUBE (SPECIFY LENGTH) | ST | |||||||||
| TIE ROD EXTENSION X1 | MN | |||||||||
| TIE ROD EXTENSION X2 | MO | |||||||||
| TIE ROD EXTENSION X3 | MP | |||||||||
| TIE ROD EXTENSION X4 | MR | |||||||||
| (INCLUDE SPECIFIC DIMENSIONS) | MW | |||||||||
| ROD MODIFICATION (INCLUDE DETAILS) | RM | |||||||||
| SPELL OUT ALL OTHER MODIFICATIONS NOT LISTED IN DETAIL (INCLUDE DRAWINGS IF POSSIBLE) |
||||||||||
K Series Code Options
- MA MT-1 MOUNT
- MB MT-1 MOUNT CUSHIONED
- MC MT-2 MOUNT
- MD T-2 MOUNT CUSHIONED
- MF ROD CLEVIS
- MG MP-1 MOUNT
- SG MP-1 MOUNT 1/2" BUSHED HOLES
- MH EYE BRACKET
- SH EYE BRACKET WITH 1/2" BUSHED HOLES
- MI MS-1 MOUNT
- MV MS-2 MOUNT
- MJ MF-1 MOUNT
- MK MF-2 MOUNT
- ML ME-3 MOUNT
- MM ME-4 MOUNT
- MN MX-1 MOUNT
- MO MX-2 MOUNT
- MP MX-3 MOUNT
- MR MX-4 MOUNT
- MX ROD EYE
- SX ROD EYE 1/2 BUSHED HOLES
- MZ CLEVIS PIN AND CLIPS
- VS VITON SEALS
- SP MAGNETIC PISTON
- RM ROD MODIFICATION